NCP4200MNR2G Switching Controllers VR11.1 4PH CTRL PMBUS ITF Integrated Circuits ICs
4PH Integrated Circuits ICs
,PMBUS ITF Integrated Circuits ICs
,NCP4200MNR2G
NCP4200MNR2G Switching Controllers VR11.1 4PH CTRL PMBUS ITF
| onsemi | |
| Product Category: | Switching Controllers |
| RoHS: | Details |
| Buck | |
| 4 Output | |
| 250 kHz to 6 MHz | |
| 100 % | |
| 1.7 V to 24 V | |
| 1.8 V | |
| 500 uA | |
| 0 C | |
| + 85 C | |
| SMD/SMT | |
| QFN-40 | |
| Reel | |
| Cut Tape | |
| MouseReel | |
| Brand: | onsemi |
| Product Type: | Switching Controllers |
| Series: | NCP4200 |
| Subcategory: | PMIC - Power Management ICs |
| Type: | Step Down |
| Unit Weight: | 0.004138 oz |
Description
The NCP4200 is an integrated power control IC with an I2Cinterface. It combines a highly efficient, multi−phase,
synchronousbuck switching regulator controller with an I2C interface, whichenables digital programming of
key system parameters to optimizesystem performance and provide feedback to the system.
It uses an internal 8−bit DAC to read a Voltage Identification (VID)code directly from the processor, which is used to
set the outputvoltage between 0.375 V and 1.6 V.
This device uses a multi−mode PWM architecture to drive thelogic−level outputs at a programmable switching
frequency that canbe optimized for VR size and efficiency.
The NCP4200 can beprogrammed to provide 2−, 3−, or 4−phase operation, allowing for theconstruction of up
to four complementary buck−switching stages. TheNCP4200 supports PSI, which is a Power Save Mode.The
NCP4200 includes an I2C interface which can be used toprogram system set points such as voltage offset,
load−line and phasebalance and output voltage. Key system performance data, such asCPU current, CPU
voltage, and power and fault conditions can also beread back over the I2C from the NCP4200.
The NCP4200 operates over the industrial temperature range of−40°C to +125°C and is available in a 40
Lead QFN package.
Features
• Selectable 2−, 3−, or 4−Phase Operation at Up to 1.5 MHz per Phase
• I2C Interface − Enables Digital Programmability of Set Points andRead−back of Monitored Values
• Logic−Level PWM Outputs for Interface to External HighPower Drivers
• Fast−Enhanced PWM for Excellent Load Transient Performance
• Active Current Balancing Between All Output Phases
• Built−In Power−Good/Crowbar Blanking Supports On−The−Fly(OTF) VID Code Changes
• Digitally Programmable 0.375 V to 1.6 V Output Supports BothVR11 and VR11.1 Specifications
• Programmable Short−Circuit Protection with ProgrammableLatchoff Delay
• Supports PSI – Power Saving Mode During Light Loads
Applications
• Desktop PC Power Supplies for VRM Modules
FAN23SV65AMPX Switching Voltage Regulators 15A SYNC BUCK REGULATOR
NCS211RSQT2G Current Sense Amplifier 1 Circuit Rail-to-Rail SC-88/SC70-6/SOT-363
NCP4208MNR2G Switching Controllers VR11.1 8PH CTRL PMBUS ITF Integrated Circuits ICs Switching Controllers VR11.1 8PH CTRL PMBUS ITF Integrated Circuits ICs
NCP1597BMNTWG Switching Voltage Regulators SYNC BUCK CONTROLLER
NCP1589AMNTWG Buck Regulator Positive Output Step-Down DC-DC Controller IC 10-DFN (3x3)
NCP308SN300T1G Supervisor Open Drain or Open Collector 1 Channel 6TSOP Integrated Circuits
