BMR4582132/014 Module DC-DC 1-OUT 12V 50A 600W Through Hole 15-Pin Quarter-Brick Tray
50A BMR4582132/014 Module
,DC-DC BMR4582132/014 Module
,12V BMR4582132/014 Module
BMR4582132/014 Module DC-DC 1-OUT 12V 50A 600W Through Hole
15-Pin Quarter-Brick Tray
| Description | Value |
| Input Voltage | 36 to 75 V |
| Lead Finish | Gold over Nickel |
| Max Processing Temp | 260 °C |
| Number of Outputs | 1 |
| Operating Temperature | -40 to 125 °C |
| Output Current | 50 A |
| Output Power | 600 W |
| Output Voltage | 12 V |
| Pin Count | 15 |
| Product Dimensions | 63.97 x 36.8 x 13.2 mm |
| Supplier Package | Quarter-Brick |
| Switching Regulator | Yes |
| Type | Step Down |
General information
Power DC/DC converters and DC/DC regulators aredesigned in accordance with the safety standards
IEC 62368-1, EN 62368-1 and UL 62368-1 Audio/video,information and communication technology
equipment -Part 1: Safety requirements
IEC/EN/UL 62368-1 contains requirements to prevent injuryor damage due to the following hazards:
• Electrical shock
• Electrically-caused fire
• Injury caused by hazardous substances
• Mechanically-caused injury
• Skin burn
• Radiation-caused injury
On-board DC/DC converters, Power interface modules andDC/DC regulators are defined as component
powersupplies. As components they cannot fully comply with theprovisions of any safety requirements
without “conditions ofacceptability”. Clearance between conductors and betweenconductive parts of the
component power supply andconductors on the board in the final product must meet theapplicable safety
requirements. Certain conditions ofacceptability apply for component power supplies withlimited stand-off
(see Mechanical Information for furtherinformation). It is the responsibility of the installer to ensurethat the
final product housing these components complieswith the requirements of all applicable safety standards
andregulations for the final product.
Component power supplies for general use shall complywith the requirements in IEC/EN/UL 62368-1.
Productrelated standards, e.g. IEEE 802.3af Power over Ethernet,and ETS-300132-2 Power interface at
the input to telecomequipment, operated by direct current (dc) are based onIEC/EN/UL 60950-1 with r
egards to safety
Flex Power DC/DC converters, Power interface modulesand DC/DC regulators are UL 62368-1 recognized
andcertified in accordance with EN 62368-1. The flammabilityrating for all construction parts of the products
meetrequirements for V-0 class material according toIEC 60695-11-10, Fire hazard testing, test flames – 50
Whorizontal and vertical flame test methods.
TP1 = -30 to +95ºC, VI = 36 to 75 V, sense pins connected to output pins unless otherwise specified under
Conditions.Typical values given at: TP1 = +25°C, VI= 53 VI max IO, unless otherwise specified under
Conditions.Additional Cin = 220 µF, Cout = 100 µF. See Operating Information section for selection of
capacitor types.
Features
• Industry standard Quarter-Brick with digital PMBusinterface
58.4 x 36.8 x 13.2 mm (2.30 x 1.455 x 0.519 in)
• High efficiency, typ. 96.4% at half load, 12 Vout
• 2250 Vdc input to output functional isolation
• Baseplate option available
• Meets safety requirements according to IEC/EN/UL62368-1
• PMBus Revision 1.3 compliant
• 8.8 million hours MTBF
• ISO 9001/14001 certified supplier
Power Management
• Configurable soft start/stop
• Precision delay and ramp-up
• Voltage margining
• Voltage/current/temperature monitoring
• Adjustable outp
Tel: +86-755-23606019
Address: Room 1205-1207,Nanguang building,Huafu Road, Futian District,Shenzhen,Guangdong,China
Laneya
Telephone:+86-13420902155
E-mail:sales@wisdtech.com.cn
Wechat:laneyatao66
WhatsApp:+8613420902155
Skype:sales@wisdtech.com.cn
